混凝土搅拌车各人或许都见过，而它的操作起来可没有那么简单了，不如我们就先一起看看，有助于您的混凝土搅拌趁魅正常运作。
You may have seen the concrete mixer, but its operation is not so simple. Let's take a look at it first to help your concrete mixer operate normally.
1、混凝土搅拌车启动前，应将搅拌利用杆放在“空档”位置。
1. Before starting the concrete mixer truck, place the mixing control lever at the "neutral" position.
2、启动后，应将搅拌利用杆放在“卸料”位置，放去筒内积水。
2. After starting, place the mixing control lever at the "unloading" position to drain the accumulated water in the cylinder.
3、运输前，卸料槽必须牢固在“行驶”位置，避免摆动。
3. Before transportation, the discharge chute must be fixed in the "driving" position to prevent swinging.
4、装料时，搅拌操作杆应放在“装料”位置。
4. When loading, the mixing lever shall be placed at the "loading" position.
5、人进入筒内清除砼结块时，应将车辆熄火，拔下电门钥匙，筒外设人监护。
5. When people enter the cylinder to remove concrete caking, they should turn off the vehicle, pull out the switch key, and assign someone outside the cylinder to monitor.
6、搞好文明施工，桶内多余质料禁绝随便乱倒。卸料后必须对搅拌筒、料槽、托辊等部位进行清洗。
6. Civilized construction shall be carried out. Excess materials in barrels shall not be dumped randomly. After unloading, the mixing drum, material trough, idler and other parts must be cleaned.
7、混凝土搅拌车启动前应对机械系统各部位认真进行检查，确认良好后方可启动。
7. Before starting the concrete mixer, each part of the mechanical system shall be carefully checked and can be started only after it is confirmed to be in good condition.
8、操作利用杆时，应在“空档”位置稍作停留后方可动至下一个位置。
8. When operating the control lever, stay in the "neutral" position for a while before moving to the next position.
Therefore, the normal operation of the concrete mixer can not be separated from these eight operations. I hope I can help you. Please come to our website for more information Ask and understand!
