混凝土搅拌车控制室以及皮带输送机重要吗？作为设备不可或缺的零部件，虽然是很是的要害的，下面小编为您剖析一番。
Is the control room of concrete mixer truck and belt conveyor important? As an indispensable part of the equipment, it is of course very critical. The following is a brief analysis for you.
混凝土搅拌车控制室是神经中枢治理相当重要，主要体现与：
The control room of concrete mixer truck is very important for nerve center management, which mainly includes:
1、设备运行前，先对各计量的进行调零，凭据砼配比单料预置称量值，所有计量称预置时，应充分考虑物料差别湿度下的落差后进行修正，使实际计量误差控制到小，外加剂经计量后加入物料混淆仓，包管砼质量。
1. Before the operation of the equipment, adjust the zero point of each measuring scale, preset the weighing value according to the concrete proportion of the single material. When preset all measuring scales, fully consider the fall of the material under different humidity, and then correct them to make the actual measurement error controlled to a small extent. After the admixture is measured, it is added into the material mixing bin to ensure the concrete quality.
2、砼产品在出料前，须与地面联系，确保有罐车接料时，进行下一步操作，避免砼的放空浪费。多种标号砼生产时，与地面联系好，避免泛起产品杂乱。
2. Before discharging concrete products, contact with the ground to ensure that the next operation is carried out when there is a tank truck to receive the materials, so as to prevent the emptying and waste of concrete. During the production of various grade concrete, contact the ground well to prevent product confusion.
3、实时视察远程仪表，发明异常现象实时通知有关人员，接纳相应解决步伐。
3. Observe the remote instrument in real time, notify relevant personnel in time and take corresponding measures in case of any abnormal phenomenon.
混凝土搅拌车的皮带输送机：
Belt conveyor of concrete mixer:
1、启动前，视察皮带上有无异物，并于检修人员及后台联系且无问题后，方可启动设备。
1. Before starting, observe whether there is any foreign matter on the belt, and contact the maintenance personnel and the backstage, and then start the equipment.
2、启动后运转3—5分钟进行设备检查，正常后再加物料，输送带上的物料没有卸完时不得任意停机。
2. After starting, run for 3-5 minutes to check the equipment, and then add materials after it is normal. Do not stop at will until the materials on the conveyor belt have been unloaded.
3、坚持输送带运行中无跑偏现象，托辊按期添加或更换润滑油，皮带清理刮板磨损实时更换。
3. Keep the conveyor belt running without deviation, add or replace lubricating oil on the carrier roller regularly, and replace the worn belt scraper in time.
Through the above explanation, I believe you have understood its importance. In order to control the equipment more carefully in daily production, it is necessary to understand the use of relevant components. Come to our website for more relevant content Ask!
